607.png

WTD-UF607TM

Quick Overview

WTD-UF607TM face recognition terminal is a kind of access control device integrated with temperature screening function. It can fast taking skin-surface temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.

  • Supports Vanadium Oxide uncooled sensor to measure target's temperature

  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C without black body

  • Recognition distance 0.3 to 1.8 m

  • Fast temperature measurement mode: Detects face and takes body temperature without identity authentication

  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc

  • Face mask wearing alert

  • If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time the authentication or           attendance is valid.

  • Forced mask wearing alert If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time the authentication or attendance will be failed.

  • Displays temperature measurement results on the authentication page

  • Triggers voice prompt when detecting fever

  • Configurable door status (open/close) when detecting fever

  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software.

  • Face recognition <0.2 s/User; face recognition accuracy rate ≥ 99%

  • 6,000 face capacity, 6,000 card capacity, and 50,000 event capacity

  • Suggested height for face recognition between 1.4 m and 1.9 m

  • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out

  • Watch dog design and tamper function

  • Audio prompt for authentication result

  • NTP, manually time synchronization and auto synchronization

  • Connects to external access controller or Wiegand card reader via Wiegand protocol

  • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed

  • Imports and export data to the device from the client software .



 

  1. Operation System : Linux
     

  2. Temperature Measurement

  • Temperature Range : 30 c to 45 c (86 F to 113 F

  • Resolution : 1920 x 1080

  • FoV : Horizontal: 37.2 c

  • Measurement Accuracy : +0.5 c (+ 32.9 F )

  • Measurement Deviation : ± 0.5 °C, without black body calibration

  • Measuring Distance : 0.3 to 2 m


  3. Display

  • Size : 7-inch

  • Resolution : 120 × 160

  • Type : Touch screen

  • Operation Method : Touch screen


  4.  Video

  • Pixel : 2 MP

  • Lens : Dual-lens

  • WDR : Support

  • Video Standard : PAL (Default)/NTSC


  5.  Network

       Wired Network : Support, 10/100/1000 Mbps self-adaptive


  6.  Interface

  • Network Interface: 1

  • RS-485 : 1

  • Wiegand : 1

  • Lock Output : 1

  • Exit Button : 1

  • Door Contact Input : 1

  • IO Input : 2

  • IO Output : 1

  • TAMPER : 1


  7.  Capacity

  • Card Capacity: 6,000

  • Face Capacity: 6,000

  • Event Capacity: 100,000


  8.  Authentication

  • Card Type: Mifare 1 card

  • Card Reading Distance: 0 to 5 cm

  • Card Reading Duration: less 1 s

  • Face Recognition Duration: less 0.2 s per person

  • Face Recognition Distance: 0.3 to 1.8 m


 9.  Function

  • Multiple Faces Detection: Not support

  • Face Anti-Spoofing: Support

  • Live View: Support

  • Audio Prompt: Support

 
 10. General info  Indicator: Support Power Supply: 12 V DC/2 A Working Temperature: -20 C to 60 C (-4 F to 140 F) For temperature For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F) Working Humidity: 10 to 90% (no condensation) Application Environment: Indoor and windless environment use only.